Gas stoves fill the air in your home with particulate matter (pm), which has been found to increase cancer risk in the long term.

So next time you buy a stove, consider choosing an induction stove.

Btw, gas stoves being better or faster than induction is a myth. They have certain specific advantages, but they are actually slower.

Obligatory Technology Connections video:
https://www.youtube.com/watch?v=eUywI8YGy0Y

  • Kbobabob@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    3 months ago

    4 kW induction cooktop should be comparable to a 40’000 BTUs gas stove (single burner).

    So this is 4000 watts? What household circuit can support that?

        • gonzo-rand19@moist.catsweat.com
          link
          fedilink
          arrow-up
          0
          ·
          3 months ago

          I’m confused as to why you’re so confident. The US has 3-phase power and homes get 120V from line 1 to the neutral (split-phase). If you use line 1 and 2, you get 240V. More than enough to power an oven. This is the case in every modern residential home in the US because they have a national building code.

          • Kbobabob@lemmy.world
            link
            fedilink
            arrow-up
            0
            ·
            3 months ago

            Yes, I’m aware that you can do this but there are not readily available outlets throughout a home for this, lol. Yes, let me move my stove or dryer so I can plug my wok induction stove in.

    • Aedis@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      3 months ago

      Idk about my math but most American household circuits require stoves to be on a (220V) dual phase 18 amp circuit. Which should output around 8kW (18A * 220V)

      • gonzo-rand19@moist.catsweat.com
        link
        fedilink
        arrow-up
        0
        ·
        3 months ago

        Should be a lot more than 18A. Should be closer to 30A-50A to account for usage. 18A is what a kitchen receptacle would require and is so low that an oven on a 18A breaker would trip constantly. I’m Canadian so I mostly know the CEC but the NEC requirements in the USA are very similar.

        More info if you’re interested.

    • warbond@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      3 months ago

      A random Better Homes and Gardens article clocks a 2000 square ft (185 square meters) home with central air conditioning at nearly 19,000 watts.

      https://www.bhg.com/home-improvement/electrical/how-to-check-your-homes-electrical-capacity/

      So I think most homes could handle that in general, but I don’t know about specific wiring requirements to handle that kind of power draw from just the kitchen. So do these things require that level of retrofit?

      • MightBeAlpharius@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        2 months ago

        I’ve never had an induction stove, but I grew up with an electric stove - IIRC, it was on a separate fuse from the rest of the kitchen, and it had a weird plug because it needed a different voltage than most other appliances.

        I would assume the requirements for an induction stove are more or less the same… Switching from regular electric to induction would probably be easy, but gas to induction would take a lot more work.

    • JustEnoughDucks@feddit.nl
      link
      fedilink
      arrow-up
      0
      ·
      3 months ago

      Uhhh, tons of people in Europe are on 240V 3 phase power.

      My oven is 3100W and that is just fine. 3 phase consumer induction cooktops can easily go that high or higher.

      Once my 3 phase charging pole is put in, my car will charge at >10000W on a household circuit.