Gas stoves fill the air in your home with particulate matter (pm), which has been found to increase cancer risk in the long term.
So next time you buy a stove, consider choosing an induction stove.
Btw, gas stoves being better or faster than induction is a myth. They have certain specific advantages, but they are actually slower.
Obligatory Technology Connections video:
https://www.youtube.com/watch?v=eUywI8YGy0Y
1 kW is 3412 BTU/h (=BTUs)
Most induction stovetops have a boost function with around 3-4 kW (that’s about 13000 BTUs).
BUT contrary to a gas stove top, almost all of the energy is actually put into the pot instead of the surroundings (only 30-40% of the energy from a gas stove is used to heat the pot). Meaning that a 4 kW induction cooktop should be comparable to a 40’000 BTUs gas stove (single burner).
So this is 4000 watts? What household circuit can support that?
Plenty can. Just need a 240v 30a outlet or higher
Which isn’t a thing in the states anyway.
I’m confused as to why you’re so confident. The US has 3-phase power and homes get 120V from line 1 to the neutral (split-phase). If you use line 1 and 2, you get 240V. More than enough to power an oven. This is the case in every modern residential home in the US because they have a national building code.
Yes, I’m aware that you can do this but there are not readily available outlets throughout a home for this, lol. Yes, let me move my stove or dryer so I can plug my wok induction stove in.
Idk about my math but most American household circuits require stoves to be on a (220V) dual phase 18 amp circuit. Which should output around 8kW (18A * 220V)
Should be a lot more than 18A. Should be closer to 30A-50A to account for usage. 18A is what a kitchen receptacle would require and is so low that an oven on a 18A breaker would trip constantly. I’m Canadian so I mostly know the CEC but the NEC requirements in the USA are very similar.
More info if you’re interested.
A random Better Homes and Gardens article clocks a 2000 square ft (185 square meters) home with central air conditioning at nearly 19,000 watts.
https://www.bhg.com/home-improvement/electrical/how-to-check-your-homes-electrical-capacity/
So I think most homes could handle that in general, but I don’t know about specific wiring requirements to handle that kind of power draw from just the kitchen. So do these things require that level of retrofit?
I’ve never had an induction stove, but I grew up with an electric stove - IIRC, it was on a separate fuse from the rest of the kitchen, and it had a weird plug because it needed a different voltage than most other appliances.
I would assume the requirements for an induction stove are more or less the same… Switching from regular electric to induction would probably be easy, but gas to induction would take a lot more work.
Uhhh, tons of people in Europe are on 240V 3 phase power.
My oven is 3100W and that is just fine. 3 phase consumer induction cooktops can easily go that high or higher.
Once my 3 phase charging pole is put in, my car will charge at >10000W on a household circuit.